The hot runner is to ensure that the plastic in the runner and gate is kept molten by heating. The hot runner system is generally composed of a hot nozzle, a distributor, a temperature control box and accessories. There are generally two types of hot nozzle: open hot nozzle.....

A hot runner is a heating component system used in injection molds to inject melted plastic particles into the cavity of the mold. Hot runner mold is a new structure that heats the runner and runner of traditional mold or three-plate mold, and does not need to remove the runner....

1, Shenzhen hot runner to save raw materials, reduce to. 2, shorten the molding cycle, improve machine efficiency. 3, improve the surface quality and mechanical properties of products. 4, do not need to use three plate mold that can use the point gate. 5, can economically....

Needle valve hot runner hot nozzle use attention to what? Valve needle hot nozzle, good color change performance, suitable for most plastics, good flow performance, very fine gate marks. Valve gate hot runner system plastic mold structure is the most complex....

Hot runner accessories wholesale What are the limitations of complete hot runner? The complete hot runner is a hot runner system with no gate waste and only injected products. Compared with the cold runner, the complete hot runner has a good effect in saving resin and reducing.....

The hot runner system is to ensure that the plastic of the runner and the gate is kept molten by heating. The hot runner system is generally composed of several parts, such as a hot nozzle, a shunt plate, a temperature control box and accessories. The hot nozzle......