A professional manufacturer that develops and produces high-quality hot runner systems including: Various hot runners and its accessories such as hot runner, hot sprue, temperature control box.

Service Hotline:

+86 135-5977-1931

4News Center -> Frequently Asked Questions
Your location: Home: ->  News Center ->  Frequently Asked Questions
2023
-
09
-
21
Hot runner Hot nozzle is a heating component system used in injection molds to inject melted plastic particles into the cavity of the mold. Hot runner mold is a new structure that heats the runner and runner of traditional mold or three-plate mold, and does not need to....
2023
-
09
-
21
In the hot runner system, it is well known that the temperature control box is an indispensable part of the temperature control system, and the thermocouple plays a pivotal role in the temperature control system, the following will introduce you to the analysis of the principle...
2023
-
09
-
21
Is the stability of hot runner temperature control box affected by temperature measurement? Hot runner temperature control box is used to control the internal temperature balance of the hot runner system controller, it mainly through the watch core intelligent computer...
2023
-
09
-
21
The hot runner temperature control box is the hot runner temperature controller. The hot runner temperature control box is a device that continuously maintains the temperature required by the hot runner system. It is composed of the temperature control card, air switch, box...
2023
-
09
-
21
What is the main function of hot runner diverter plate manufacturing? The diverter plate is a part of diverting the molten material, which can transfer the molten plastic from the injection molding machine to the mold cavity, and its role is to transfer the molten raw...
2023
-
09
-
21
What are the limitations of a full hot runner? The complete hot runner is a hot runner system with no gate waste and only injected products. Compared with the cold runner, the complete hot runner has a good effect in saving resin and reducing the injection cycle. All kinds...
   Total:6  Total Length:1 | The current page:1  9First   7Previous   Next8   End page:  Go to: