Temperature control box

4dhcpmingchen

Your location Home: -> Hot Runners: -> Temperature control box of hot runner -> Temperature control box

Temperature control box

DHA8 is a temperature controller specialized for hot runner heaters, suitable for all hot runner heaters with loads not exceeding 15A. Its appearance and installation method adopt international standard structures, suitable for any standard chassis. The power wiring system and load connection method are both standard structures. Each control card controls the temperature of a circuit's heater. The temperature control card is easy to insert and can be interchanged with that of other manufacturers.

1. Function and Features:

The temperature control card adopts an international standard structure, which is easy to replace and can be interchanged with products from other manufacturersEach temperature control card has the same function, so it can be interchanged for easy maintenance and storage of spare parts by usersTwo types of thermocouple sensor signals, K-type and J-type, can be set, with precise temperature nonlinearity processing and integrated cold junction compensationThe control mode can be selected as zero crossing trigger (SSr) or phase angle control (PAc)Temperature setting and display can be done in two ways: Celsius (℃) and Fahrenheit (℉)Thermocouple wire breakage alarm function, automatic protection for thermocouple wire breakageThermocouple reverse connection alarm function, automatic protection for thermocouple reverse connectionThermocouple short circuit alarm function, automatic protection for thermocouple short circuitHeating coil open circuit alarm function, automatic protection for heating coil open circuitThyristor breakdown alarm function,FUZYY+PID control algorithm, PID parameters can be automatically adjusted online or manually setEquipped with a hot runner soft start heating method, the soft start heating power and heating time can be freely setIn addition to automatic control, the system is also equipped with manual control for heating in special situationsEquipped with a 380V voltage protection function for incorrect connection, ensuring the safety of the temperature control card.

Operating ambient temperature：

32 ℉ to 131 ℉ (0 ℃ to 55 ℃)

Storage environment temperature：

-40 ° F to 158 ° F (-40 ° C to 70 ° C)

Types of sensors：

J or K type thermocouple sensor

Temperature range of the sensor：

32 ℉ to 860 ℉ (0 ℃ to 450 ℃)

Temperature accuracy：

Plus or minus 0.1 degrees

Safety tube protection：

220V 15A dual circuit fast fuse

Control output type：

Bidirectional thyristor 15A 220VAC

Power supply：

86-240VAC 50/60Hz

Hot Runners

Excessive production technology provides you with better products

Temperature control box